Author Topic: CSWIP 3.4U - Underwater Inspection Controller  (Read 2450 times)

0 Members and 4 Guests are viewing this topic.

Offline zan_ndtTopic starter

  • Newbie Diver
  • Join Date: Nov 2009
  • Posts: 4
  • Last Login:December 11, 2009, 02:48:30 PM
CSWIP 3.4U - Underwater Inspection Controller
« on: November 26, 2009, 08:08:26 AM »

Hi all :hello:

I'm newbie here and don't have any experience in diving.Just want to know if any of u guys know anything about this 3.4U job?

As far i goggle,this course been held at Thailand for this year but unfortunately next year only in UK(of course budget is my main prob).

I am ndt surface practitioner right now and been in this field around 9 years and from the requirement of that course,

i'm eligable to take the course.So any of you guys can share any info about 3.4u practitioner?Right now i'm in Brunei for doing pipelay project.

Cheers guys. 


Offline necrosis

  • Sport Diver
  • *
  • Join Date: Apr 2008
  • Posts: 94
  • Location: Singapore
  • Gender: Male
  • Last Login:January 27, 2012, 11:12:41 PM
  • Air Supervisor, DMT, LST
Re: CSWIP 3.4U - Underwater Inspection Controller
« Reply #1 on: September 05, 2010, 03:37:56 AM »

Hi Zan,

Its been a very long time since you posted this, have you done your 3.4u course?


Offline shark_fin

  • Newbie Diver
  • Join Date: Jul 2010
  • Posts: 37
  • Location: i'm here
  • Gender: Male
  • Last Login:October 26, 2011, 10:42:34 PM
  • ''be great what u want''
Re: CSWIP 3.4U - Underwater Inspection Controller
« Reply #2 on: November 19, 2010, 04:20:34 PM »

hye zan salam...for ur information,first u must have dive course like open water course and u can apply commercial diver course at tstc terengganu,if u want go on with CWISP underwater work,what i know at CWISP  sungai buluh have 3.4u course next year,and to be 3.4u inspector u must have get 3.1u,3.2u...any information u can call sungai buloh CWISP.

Offline necrosis

  • Sport Diver
  • *
  • Join Date: Apr 2008
  • Posts: 94
  • Location: Singapore
  • Gender: Male
  • Last Login:January 27, 2012, 11:12:41 PM
  • Air Supervisor, DMT, LST
Re: CSWIP 3.4U - Underwater Inspection Controller
« Reply #3 on: November 19, 2010, 11:25:15 PM »

hye zan salam...for ur information,first u must have dive course like open water course and u can apply commercial diver course at tstc terengganu,if u want go on with CWISP underwater work,what i know at CWISP  sungai buluh have 3.4u course next year,and to be 3.4u inspector u must have get 3.1u,3.2u...any information u can call sungai buloh CWISP.


Salam butayie,

Your explanation is a bit misleading...

You don't necessarily have to be a diver in order to do the 3.4u Underwater Inspection Controller course.
I have worked with quite a number of Underwater Inspection Controllers who don't even know how to swim, let alone dive.

According to Document No.CSWIP-DIV-7-95-Part 2 :-

To be eligible to attempt Grade 3.4u the candidate must:

i) have a qualification in a relevant engineering or science subject which should not be less than HNC level or equivalent and a minimum of 12 months subsea engineering related work, including a minimum of 60 days spent at an offshore site,

or

ii) be a current or previously approved CSWIP 3.3u ROV Inspector who has held such certification for a minimum of one year, with a minimum of 300 logged hours of underwater inspection work,

or

iii) be a current or previously approved CSWIP 3.2u or 3.2u Diver Inspector who has held such certification for a minimum of three years, with a minimum of 100 logged hours of underwater inspection work,

or

iv) be a surface NDT Practitioner, certified under PCN/CSWIP in ultrasonic testing, magnetic particle or penetrant testing or equivalent approval accepted by the CSWIP In-Service Inspection Management Committee, who has a minimum of three years documented experience in the application of NDT methods related to offshore facilities and to have spent a minimum of 30 days at an offshore work site gaining familiarity with underwater inspection techniques.

and by the way, CSWIP is administered by TWI Certification Ltd, the one in Sungai Buloh is one of TWI's Training centre.

TWI Training & Certification (S.E.Asia) Sdn. Bhd.
No 8 Jalan TSB 10
Sg. Buloh Industrial Park
47000 Sg Buloh,
Selangor Darul Ehsan
Malaysia

Tel: +603-61573526/7/8
Fax: +603-61572378
E-mail: inquiry@twisea.com


Hope the above is of interest.
« Last Edit: November 19, 2010, 11:28:53 PM by necrosis »

Offline shark_fin

  • Newbie Diver
  • Join Date: Jul 2010
  • Posts: 37
  • Location: i'm here
  • Gender: Male
  • Last Login:October 26, 2011, 10:42:34 PM
  • ''be great what u want''
Re: CSWIP 3.4U - Underwater Inspection Controller
« Reply #4 on: November 20, 2010, 11:38:16 AM »

hye zan salam...for ur information,first u must have dive course like open water course and u can apply commercial diver course at tstc terengganu,if u want go on with CWISP underwater work,what i know at CWISP  sungai buluh have 3.4u course next year,and to be 3.4u inspector u must have get 3.1u,3.2u...any information u can call sungai buloh CWISP.


Salam butayie,

Your explanation is a bit misleading...

You don't necessarily have to be a diver in order to do the 3.4u Underwater Inspection Controller course.
I have worked with quite a number of Underwater Inspection Controllers who don't even know how to swim, let alone dive.

According to Document No.CSWIP-DIV-7-95-Part 2 :-

To be eligible to attempt Grade 3.4u the candidate must:

i) have a qualification in a relevant engineering or science subject which should not be less than HNC level or equivalent and a minimum of 12 months subsea engineering related work, including a minimum of 60 days spent at an offshore site,

or

ii) be a current or previously approved CSWIP 3.3u ROV Inspector who has held such certification for a minimum of one year, with a minimum of 300 logged hours of underwater inspection work,

or

iii) be a current or previously approved CSWIP 3.2u or 3.2u Diver Inspector who has held such certification for a minimum of three years, with a minimum of 100 logged hours of underwater inspection work,

or

iv) be a surface NDT Practitioner, certified under PCN/CSWIP in ultrasonic testing, magnetic particle or penetrant testing or equivalent approval accepted by the CSWIP In-Service Inspection Management Committee, who has a minimum of three years documented experience in the application of NDT methods related to offshore facilities and to have spent a minimum of 30 days at an offshore work site gaining familiarity with underwater inspection techniques.

and by the way, CSWIP is administered by TWI Certification Ltd, the one in Sungai Buloh is one of TWI's Training centre.

TWI Training & Certification (S.E.Asia) Sdn. Bhd.
No 8 Jalan TSB 10
Sg. Buloh Industrial Park
47000 Sg Buloh,
Selangor Darul Ehsan
Malaysia

Tel: +603-61573526/7/8
Fax: +603-61572378
E-mail: inquiry@twisea.com


Hope the above is of interest.



 i'm so sory bcoz i'm not known more about that.Because i now doing uw commercial in mechanical course,and also i want starts CWISP inspector soon.I current PCN/CWISP in practitioner surface NDT.
TQ for ur details information about that.where place others thailand for doing 3.1u,3.2u if u know...


Offline necrosis

  • Sport Diver
  • *
  • Join Date: Apr 2008
  • Posts: 94
  • Location: Singapore
  • Gender: Male
  • Last Login:January 27, 2012, 11:12:41 PM
  • Air Supervisor, DMT, LST
Re: CSWIP 3.4U - Underwater Inspection Controller
« Reply #5 on: November 20, 2010, 01:38:29 PM »




 i'm so sory bcoz i'm not known more about that.Because i now doing uw commercial in mechanical course,and also i want starts CWISP inspector soon.I current PCN/CWISP in practitioner surface NDT.
TQ for ur details information about that.where place others thailand for doing 3.1u,3.2u if u know...


[/quote]

Hi Butayie,

Would be great if you can share with us more about "uw commercial in mechanical course" and where is the course held, as i've never heard of such course before. As for 3.1u and 3.2u, last i know, these courses are only conducted in TWI Middlesbrough and Thailand. Email inquiry@twisea.com if you need further details.

Hope the above is of interest.

Offline shark_fin

  • Newbie Diver
  • Join Date: Jul 2010
  • Posts: 37
  • Location: i'm here
  • Gender: Male
  • Last Login:October 26, 2011, 10:42:34 PM
  • ''be great what u want''
Re: CSWIP 3.4U - Underwater Inspection Controller
« Reply #6 on: November 20, 2010, 02:13:12 PM »




 i'm so sory bcoz i'm not known more about that.Because i now doing uw commercial in mechanical course,and also i want starts CWISP inspector soon.I current PCN/CWISP in practitioner surface NDT.
TQ for ur details information about that.where place others thailand for doing 3.1u,3.2u if u know...




Hi Butayie,

Would be great if you can share with us more about "uw commercial in mechanical course" and where is the course held, as i've never heard of such course before. As for 3.1u and 3.2u, last i know, these courses are only conducted in TWI Middlesbrough and Thailand. Email inquiry@twisea.com if you need further details.

Hope the above is of interest.
[/quote]

owh..ok,
like i write above "uw commercial in mechanical course" its mean work others inspection like rig,sat diver..but i know i error typing bcoz u not understand,i doing commercial diver course conducted by ITDA next year at tstc.But wat i heard ITDA not qualified like ADAS.
And i have plan to doing course at ADAS mei2011 or CWISP 3.1u,3.2u if not any problem.

please info. me more abaout that if have wrong....CHERRSS.....

Offline mocha

  • Global Moderator
  • *****
  • Join Date: Sep 2006
  • Posts: 2,589
  • Location: KL
  • Gender: Male
  • Last Login:January 20, 2012, 07:15:53 PM
  • gempur wira
Re: CSWIP 3.4U - Underwater Inspection Controller
« Reply #7 on: December 24, 2010, 10:40:22 AM »

Got this from TWI website..

United Kingdom   Middlesbrough   £2470.00 (+vat)   04-JAN-2011   
United Kingdom   Aberdeen           £2470.00 (+vat)   17-JAN-2011   
United Kingdom   Aberdeen           £2470.00 (+vat)   21-FEB-2011   
Malaysia           Kuala Lumpur   RM 13970           21-FEB-2011   
United Kingdom   Middlesbrough   £2470.00 (+vat)   07-MAR-2011   
United Kingdom   Aberdeen           £2470.00 (+vat)   04-APR-2011   
United Kingdom   Middlesbrough   £2470.00 (+vat)   09-MAY-2011   
Thailand           Thailand           USD 4109           16-MAY-2011   
Malaysia           Kuala Lumpur   RM 13970           06-JUN-2011
United Kingdom   Middlesbrough   £2470.00 (+vat)   01-AUG-2011   
United Kingdom   Middlesbrough   £2470.00 (+vat)   15-AUG-2011   
Australia           Perth                   USD 4109           10-OCT-2011   
United Kingdom   Middlesbrough   £2470.00 (+vat)   31-OCT-2011   
Thailand           Thailand           USD 4109           14-NOV-2011   
Malaysia           Kuala Lumpur   Please Contact    21-FEB-2012

Offline stonefins

  • Sport Diver
  • *
  • Join Date: May 2007
  • Posts: 226
  • Location: Kuching
  • Gender: Male
  • Last Login:February 05, 2011, 07:51:17 PM
Re: CSWIP 3.4U - Underwater Inspection Controller
« Reply #8 on: January 10, 2011, 03:54:22 AM »

Got this from TWI website..

United Kingdom   Middlesbrough   £2470.00 (+vat)   04-JAN-2011   
United Kingdom   Aberdeen           £2470.00 (+vat)   17-JAN-2011   
United Kingdom   Aberdeen           £2470.00 (+vat)   21-FEB-2011   
Malaysia           Kuala Lumpur   RM 13970           21-FEB-2011   
United Kingdom   Middlesbrough   £2470.00 (+vat)   07-MAR-2011   
United Kingdom   Aberdeen           £2470.00 (+vat)   04-APR-2011   
United Kingdom   Middlesbrough   £2470.00 (+vat)   09-MAY-2011   
Thailand           Thailand           USD 4109           16-MAY-2011   
Malaysia           Kuala Lumpur   RM 13970           06-JUN-2011
United Kingdom   Middlesbrough   £2470.00 (+vat)   01-AUG-2011   
United Kingdom   Middlesbrough   £2470.00 (+vat)   15-AUG-2011   
Australia           Perth                   USD 4109           10-OCT-2011   
United Kingdom   Middlesbrough   £2470.00 (+vat)   31-OCT-2011   
Thailand           Thailand           USD 4109           14-NOV-2011   
Malaysia           Kuala Lumpur   Please Contact    21-FEB-2012


have to minta sponsor frm KTM lah hahahhaha